M e n u f u n c t i o n s40Listen to the radio1. Select Menu > Organizer > Radio.The channel location number, the name of the radio channel (if you havesaved the channel), and the frequency of the radio channel are displayed.2. If you have already saved radio channels, scroll up or down to the channel youwant to listen to.You can also select a radio channel location by briefly pressing thecorresponding number keys.Tune a radio channel1. When the radio is one, select or to change the radio frequency in0.05 MHz steps, or select and hold or to start the channel search.Searching stops when a channel is found.2. To save the channel to a memory location 1–9, press and hold thecorresponding number key.To save the channel in the memory location from 10–20, press briefly 1 or 2,then press and hold the desired number key 0—9.3. Enter the name of the channel, and select OK.Basic radio functionsWhen the radio is on, the following functions are available:• To turn off the radio, select Options > Turn off.• To adjust the volume of the radio, select Volume. To increase or decrease thevolume of the earpiece or headset, scroll right or left.• To save the radio channel you have found, select Options > Save channel.See "Tune a radio channel," p. 40. You can save up to 20 radio channels.• To select the list of saved channels, select Options > Channels. To delete orrename a channel, scroll to the desired channel, and select Options > Deletechannel or Rename.• To enter the frequency of the desired radio channel, select Options >Set frequency.• To listen to the radio using the loudspeaker or headset, select Options >Loudspeaker or Headset. Keep the headset connected to the phone. The leadof the headset functions as the radio antenna.You can normally make a call or answer an incoming call while listening to the radio.During the call, the volume of the radio is muted.When an application using an GPRS connection is sending or receiving data, itmay interfere with the radio.