P u s h t o t a l k80■ PTT settingsThere are two kinds of PTT settings: settings for connecting to theservice and settings for use.You may receive the settings for connecting to the service from yourservice provider. See “Configuration settings service,” p. 10. You canenter the settings manually. See “Configuration,” p. 58.To select the settings for connecting to the service, select Menu > Pushto talk > Config. settings and from the following options:Configuration — to select a service provider, Default, or Personal config.for PTT service. Only the configurations that support the PTT service areshown.Account — to select a PTT service account contained in the activeconfiguration settingsYou can also select from the following options: PTT user name, Defaultnickname, PTT password, Domain, and Server addressTo edit the PTT settings for use, select Menu > Push to talk > PTTsettings and from the following:1 to 1 calls > On — to select the phone to allow the reception ofincoming one-to-one calls1 to 1 calls > Off — to make but not receive one-to-one calls. The serviceprovider may offer some services that override these settings. To set thephone to first notify you of incoming one-to-one calls with a ringingtone, select Notify.Listened channels > On — to activate the listened channelsPTT status in startup > Yes — to set the phone to automatically connectto the PTT service when you switch the phone onSend my PTT address > No — to hide your PTT address from channel andone-to-one calls