M e d i a72Tune a radio channel1. When the radio is on, select , or to change the radiofrequency in 0.05 MHz steps, or select and hold , or to startthe channel search. Searching stops when a channel is found.2. To save the channel to a memory location 1 to 9, press and hold thecorresponding number key.To save the channel in the memory location from 10 to 20, pressbriefly 1 or 2, and press and hold the desired number key 0 to 9.3. Enter the name of the channel, and select OK.Basic radio functionsWhen the radio is on, do the following:To turn off the radio, select Options > Switch off.To save the radio channel you have found, select Options > Save station.See “Tune a radio channel,” p. 72. You can save up to 20 radio channels.To set whether the visual radio application is used, select Options >Visual radio. Some radio channels may send text or graphicalinformation that you can view using the visual radio application.To select the options for visual radio, select Options > Visual radio sett..To set whether the visual radio application starts automatically whenyou turn on the radio, select Enable visual service > Automatically,Manually, or Ask first.Select Options > Visual radio sett. > Station directory to access a Website with a list of radio stations, and if available, their visual radio ID,which you can receive in your region.To select the list of saved channels, select Options > Stations. To deleteor rename a channel, or to enter the ID for a visual radio channel, scrollto the desired channel, and select Options > Delete station, Rename, orVisual service ID.To listen to the radio in monophonic sound or in stereo, select Options >Mono output or Stereo output.