C a l l f u n c t i o n s204. Call functions■ Make a call1. Enter the phone number, including the area code. To delete an incorrectcharacter, select Clear.For international calls, press * twice for the international prefix (the + characterreplaces the international access code); and then enter the country code, thearea code without the leading 0, if necessary, and the phone number.2. To call the number, press the call key.3. To end the call or to cancel the call attempt, press the end key, or selectOptions > End call.■ 1-touch dialingAssign a phone number to one of the 1-touch dialing keys, 2 to 9. Call thenumber by one of the following ways:• Press a 1-touch dialing key, and then press the call key.• If 1-touch dialing is set to On, press and hold a 1-touch dialing key until thecall is started. See 1-touch dialing in ”Call,” p. 46.■ Enhanced voice dialingYou can make a phone call by saying the name that is saved in the contact list ofthe phone. A voice command is added automatically to all entries in the contactlist of the phone.Make a voice dialing callIf an application is sending or receiving data using a packet data connection, endthe application before you use voice dialing.Voice commands are language-dependent. To set the language, see Voiceplayback language in ”Phone,” p. 47.Note: Using voice tags may be difficult in a noisy environment or duringan emergency, so you should not rely solely upon voice dialing in allcircumstances.1. In the standby mode, press and hold the right selection key. A short tone isplayed, and Speak now is displayed.If you are using a compatible headset with the headset key, press and holdthe headset key to start the voice dialing.
