Nokia 6152 User Manual

Contents

M e s s a g e s36 FCC DRAFT2. Scroll to an (empty) speed dialling slot, and select Assign.3. Enter your mailbox phone number, including the area code.4. Enter any dialling codes as necessary after the entered phone number.For example, if you pause for 5 seconds after connecting to voice mail, enter ptwice (two times 2.5 seconds) after the voice mailbox number:2145551212pp.5. Enter any remaining pauses or other information that enables you to listen toyour messages, and select OK.6. Enter a name (such as voice mail), and select OK.To dial and listen to your voice mail, press and hold the assigned speed diallingkey in the standby mode.Insert dialling codesPress * repeatedly to cycle through dialling codes. When the desired code appearsin the display, pause briefly and the code is inserted into the dialling string.The following dialling codes are available:*—Bypasses a set of instructions.p—Pauses for 2.5 seconds before sending any numbers that follow.+—Replaced by the international access code.w—Waits for you to press the call key before sending the numbers or codes thatfollow.Clear voice mail iconTo clear the voice mail icon from the display, in the standby mode, select Menu >Messages > Voice messages > Clear voice message icon.■ Web messagingWeb messaging is a network service. See ""Network Services," p. 5" p. 5.If your wireless service provider supports this feature, you can use theminibrowser to check for e-mail messages. In the standby mode, select Menu >Messages > Minibrowser messages > Connect.See ""Uni," p. 89" p. 89 for more information on using the minibrowser in yourdevice to access web pages.