[ 123 ]Menu functionsWork with an existing voice commandAfter you have associated a voice tag to a command, you can choose oneof the following options:• Select Playback to listen to the voice command tag.• Select Change to change the voice command.• Select Delete to erase the voice command tag.Audible alertsAudible alerts use a series of beeps to inform you of the current signalstrength or battery level of your phone.Note: In order to obtain audible alerts, the alerts must first be setup as voice commands. To set up voice commands, see “Add a voicetag for the command” on page 122.Set up audible alerts1 If you have the optional headset attached, press and hold theheadset button.ORPress and hold Contacts (or Go to).ORPress and hold the volume down key.2 When Please speak now appears, pronounce the voice tag clearly intothe microphone.When the phone finds the tag, Found appears, and the phone playsthe recognized voice tag from the phone memory through the earpieceThe phone then beeps, according to the strengths indicated in thefollowing table:Audible alert One beep Two beeps Three beeps Four beepsBattery bar strength Low Half-full Almost full FullSignal bar strength Weak Moderate Strong Strongest
