C O N T A C T S48To add pause codes to phone numbers in Contact List entries,do the following:1. Select Contacts, the contact you want to modify, and Edit.2. Highlight the number you want to modify, and select Options >Add Pause > Wait or Pause > OK.Assign Picture IDYou can set picture ID to display the picture of a caller from your ContactList when your phone rings. To assign a picture ID to a contact in theStandby Mode, do the following:1. Select Contacts, the contact you want to modify, and Edit.2. Scroll to the Picture: field, and select Set.3. Highlight an existing image from My Pictures, and select OK to usethe image as the picture ID for the contact. MY PICTURES EMPTY isdisplayed if My Pictures is empty.4. If My Pictures is not empty, select Set > Options > Take Picture to takea new picture with the built-in camera. Or select Get New Pictures >Get New Applications to download an image from the internet.5. Select SAVE to save the changes to the contact.Add a RingtoneYou can add a distinctive ringtone to distinguish which contact iscalling. To assign a ringtone to a contact in the Standby Mode:1. Select Contacts, the contact you want to modify, and Edit.2. Scroll to the Ringtone: field, and select Set.3. Highlight an existing ringtone from the Ringtone list, and selectOK to use the ringtone for the contact, or select Play to listen tothe ringtone.4. To download and use a new ringtone from the internet, selectGet New Applications.