M e s s a g e s ( M e n u 1 )34 Copyright © 2004 Nokia. All rights reserved.The following dialling codes areavailable:*—Bypasses a set of instructions.+—International dialling access.p—Pauses for 2.5 seconds beforesending any numbers that follow.w—Waits for you to press the Callkey before sending the numbers orcodes that follow.Setup voice mail with diallingcodes1. At the standby mode screen,select Names > Speed dial.2. Scroll to an (empty) speeddialling slot and press Assign.3. Enter your voice mailbox number,including the area code.4. Refer to dialling codes and enterany codes as necessary using theinformation that you wrote downfrom “Setup voice mail withdialling codes” on page 34.For example, if you pause for 5seconds after connecting to voicemail, enter p twice after the voicemailbox number, for example,2145551212pp.5. Enter any remaining pauses orother information that allowsyou to listen to your messages,and press OK.6. Enter a name (such as VoiceMail), and press OK.To dial and listen to your voice mail,press and hold the assigned speeddialling key at the standby modescreen.■ Web messagesWeb messaging is a network service.See “Network Services” on page 9 formore information.If your wireless service providersupports this feature, you can usethe Minibrowser to check for e-mailmessages. At the standby modescreen, select Menu > Messages >Minibrowser messages > Connect.See “Mobile Web (Menu 9)” on page87 for more information on usingthe Minibrowser in your phone toaccess web pages.■ Message foldersSave drafts and receivedmessages to foldersYou can save drafts of messages orreceived messages to an existingfolder or to a folder that you havecreated.1. Open the received message orcreate a new message, and pressOptions.