T o o l s101Measure split or lap timeUse the split time or lap time functions for activities where you need to pace yourself.1. In the standby mode, select Menu > Tools > Stopwatch > Split timing or Laptiming > Start.Split timing—Use the split time function for such activities as a long distancerace when you need to pace yourself. Select Split to note the lapsed time. Thetimer continues to run and the split time appears below the running time.Each time you select Split, the new measured time appears at the beginningof the list. The maximum number of splits is 20.Lap timing—Use the lap time function when you want to track how long ittakes to complete each cycle or lap. Select Lap to note the lap time. The clockstops, then immediately restarts from zero. The lap time appears below therunning time. Each time you select Lap, the new measured time appears atthe beginning of the list. The maximum number of laps is 20.2. Select Stop to end timing and display total time.Save a timeTo save a time while the clock is running, select Stop > Save, enter a name for themeasurement, and select OK. If you do not enter a name, the total time is used asthe default title for the lap or split time.Stopwatch optionsIn the standby mode, select Menu > Tools > Stopwatch and one of the following:Continue—Continues to measure time. Only appears if clock is running and youare returning to stopwatch screen.Show last time—View the last measured time.Split timing—Use the split time function.Lap timing—Use the lap time function.View times—Browse saved times.Delete times > One by one or Delete all—Delete saved times.Operation noteIf you press the end key and return to the standby mode, the clock continues torun in the background, and appears at the top of the screen.To return to the Stopwatch screen, do the following:1. In the standby mode, select Menu > Tools > Stopwatch > Continue.2. To stop the clock, select Stop.
