S e t t i n g s65Change the format1. In the standby mode, select Menu > Settings > Time and date > Date > Dateformat and the format of your choice.2. With Date on the display, select Date separator, and the separator of your choice.Set the auto-update of date and timeAuto-update is a network service. See "Network services," p. 6 for more information.If your wireless service provider supports this feature, you can allow the digitalnetwork to set the clock, which is useful when you are out of your home area (forexample, when you have traveled to another network or time zone).In the standby mode, select Menu > Settings > Time and date > Auto-update ofdate/time > On, Confirm first, or Off.If you use the Auto-update of date/time option while outside your digital network,you may be prompted to enter the time manually. Network time will replace thetime and date when you reenter your digital network.If your battery has been removed or has discharged outside the digital network,you may be prompted to enter the time manually (once the battery is replaced orrecharged, and you are still outside of the digital network).■ CallLocation info sharingLocation info sharing sets whether your GPS signal is always on or only in thecase of an emergency call.In the standby mode, select Menu > Settings > Call > Location info sharing >Emergency or On.GPS should not be used for precise location measurement, and you should neverrely solely on location data from the GPS receiver.This feature is not designed to support positioning requests for related calls.Contact your service provider for more information about how your phone complieswith government regulations on location based emergency calling services.Anykey answerWhen Anykey answer is on, briefly press any key except the right selection or endkey to answer a call.In the standby mode, select Menu > Settings > Call > Anykey answer > On or Off.
