30Automate voice mailVoice mail services vary by network operator. The following instructions are examples ofcommon operations. Please check with your network operator for specific instructions onusing your voice mail service.Write down voice mailbox number and process1. Write down your voice mailbox number.2. Call and check your voice mail as you normally would.3. Write down your interaction with the recorded prompts step-by-step. Keep in mind thateach voice mail service may vary. However, it should look similar to the following:Dial 8585551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, and press #.Phone numbers with dialing codesYou can insert special characters called dialing codes into phone numbers such as voice mail,and save the number to a speed dialing location.Dialing codes instruct the receiving system to pause, wait, bypass, or accept the numbersthat follow them in the dialing string. To set up dialing codes, do the following:1. Select Menu > Contacts > 1-touch dialing.2. Scroll to an (empty) speed dialing slot, and select Assign.3. Enter your mailbox phone number, including the area code.4. Enter any dialing codes as necessary after the entered phone number.For example, if you pause for 5 seconds after connecting to voice mail, enter p twice(two times 2.5 seconds) after the voice mailbox number: 2145551212pp.5. Enter any remaining pauses or other information that enables you to listen to your messages,and select OK.6. Enter a name (such as voice mail), and select OK.To dial and listen to your voice mail, press and hold the assigned speed dialing key in thestandby mode.Insert dialing codesPress * repeatedly to cycle through dialing codes. When the desired code appears in the display,pause briefly, and the code is inserted into the dialing string.The following dialing codes are available:*—Bypasses a set of instructionsp—Pauses for 2.5 seconds before sending any numbers that follow+—Replaced by the international access codew—Waits for you to press the call key before sending the numbers or codes that follow
