56Disable data storage connection1. To disable the USB data cable, double-click the green arrow on the task bar at thebottom of your PC screen.A window pops up that displays Unplug or Eject Hardware.2. Click on USB Device in the Hardware devices window.A popup window displays Stop a Hardware device.3. Highlight USB device, and click OK.The popup window, Safe to Remove Hardware, is displayed with The ‘USB Device’device can now be safely removed from the system.4. Click OK.Important: To ensure that all memory card operations are completed in a controlledway, do not unplug the connectivity cable until Windows notifies you that it is safe to doso. Uncontrolled completion or unexpected disruptions of the memory card operationsmay cause the memory card and the information stored on it to become corrupted.A corrupted memory card may have to be formatted before it can be used again.When a memory card is formatted, all information on the card is permanently lost.■ EnhancementsSelect Menu > Settings > Enhancements. You can select an enhancement menu if the phoneis or has been connected to a compatible enhancement type. Depending on enhancement,select from the following options:Default profile—Choose the profile you wish to be automatically activated when a headset,car kit, or loopset is connected.Automatic answer—Answer calls automatically after one ring when a headset, car kit, loopset,or charger is connected. Select On or Off.Lights (for Handsfree or Charger only)—Choose to keep the phone lights always on, or toshut off automatically after several seconds. Select On or Automatic.If the Loopset is connected and recognized through the Pop-Port™ connector, the phoneautomatically uses the Loopset.TTY/TDD (network service)—Connect to a TTY/TDD device. Check with the manufacturer ofthe TTY/TDD device for a connecting cable that is compatible with your phone. Check withyour service provider for availability and description of services.■ SecurityPIN codeThe PIN code protects the UIM card from unauthorized access. The PIN code can be 4–8 digits inlength. After three successive incorrect entries, the PIN code is blocked. You need to enter thepersonal unblocking key (PUK) code. See"Personal unblocking key (PUK) code," p. 58.
