P h o n e a t a g l a n c e122. When you arrive at a menu, to enter submenus, press Select (the centerselection key).To return to the previous menu, select Back from the submenu level.To return to the standby mode from any menu or submenu, press the end key.Main menu displayYou can control whether your phone menu is displayed as a List, Grid or Gridwith labels. By default, the main menu displays in Grid with labels format.Select Menu > Options > Main menu view > List, Grid, or Grid with labels.If supported by your wireless service provider, you can also change the orderof menus in your main menu.Select Menu > Options > Organize. Scroll to a menu, and select Move. Use thescroll key to move the menu to a new location, and select OK. You can repeatthis procedure to customize your main menu.To save the changes, select Done > Yes.In-phone helpMany features have brief descriptions (help text) that can be viewed on thedisplay. To view these descriptions, scroll to a feature, and wait for about15 seconds. Scroll down to view all of the description, or select Back to exit.In order to view the descriptions, you must activate help text. Select Menu >Settings > Phone > Help text activation > and an option.■ Lock codeYour device has a security option allowing you to lock your phone with a code.When the code is set and turned on, no outgoing calls are allowed, and themenu cannot be accessed without entering the correct code first. This preventsunauthorized outgoing calls or access to any information stored on your device.The Security option is in the Settings menu. The first time you access the Securityoption, you must enter a lock code. The default lock code may vary depending onyour wireless service provider. The preset lock code may be the last four digits ofyour phone number, 1234 or 0000. If none of these work, contact your wirelessservice provider for help.You must enter the lock code to access the following Security option:1. In the standby mode, select Menu > Settings > Settings > Security.2. Enter the lock code, and select OK. See "Change lock code," p. 37.
