S e t t i n g s26On—The device location information is shared with the network whenever thedevice is powered on and activated. The screen displays in the upper lefthand corner in the standby mode.Location information is shared with the network during emergency calls tothe official emergency number programmed into the device, regardless of thesetting. After making an emergency call, the device remains in the emergencymode for 5 minutes. During this time, the location information is shared withthe network. See "Emergency calls," p. 90.Anykey answerAnykey answer enables you to answer an incoming call. Briefly press any keyexcept the right selection or end key. Select Menu > Settings > Call > Anykeyanswer > On or Off.Automatic redialOccasionally, your network may experience heavy traffic, resulting in a fast busysignal when you dial. With automatic redial activated, your device redials thenumber (number of times is specified by the network), and notifies you when thenetwork is available. Select Menu > Settings > Call > Automatic redial > On or Off.1-touch dialingTo activate or deactivate 1-touch dialing, select Menu > Settings > Call >1-touch dialing > On or Off. See "Set up 1-touch dialing," p. 47.Automatic service updateYour device is capable of receiving updates to wireless services sent to yourdevice by your network operator. Select Menu > Settings > Call > Automaticupdate of service > On or Off.Calling cardsIf you use a calling card for long distance calls, save the calling card numberin your phone. The phone can store up to four calling cards. Contact your callingcard company for more information.Save information1. Select Menu > Settings > Call > Calling card.2. Enter your lock code, and select OK. See "Security settings," p. 36.3. Scroll to the calling card of your choice, and select Options > Edit > Select >Dialing Sequence.
