Nokia 6275i User Manual

Also see for 6275i: Quick start guide User guide User guide User guide User guide

S e t t i n g s56Infrared connectivityYou can set up the phone to receive data through its infrared (IR) port. To use anIR connection, the device with which you want to establish a connection must beIrDA compliant. You can send or receive data to or from a compatible phone ordata device (for example, a computer) through the IR port of your phone.Warning: Do not point the IR beam at anyone’s eye or allow it to interferewith other IR devices. This device is a Class 1 laser product.When sending or receiving data, ensure that the IR ports of the sending andreceiving devices are pointing at each other and that there are no obstructionsbetween the devices.To activate IR in your phone, select Menu > Settings > Connectivity > Infrared.To deactivate the IR connection, select Menu > Settings > Connectivity > Infrared.When the phone displays Deactivate infrared?, select Yes.If data transfer is not started within 2 minutes after the activation of the IR port,the connection is cancelled and must be started again.IR connection indicatorWhen is shown continuously, the IR connection is activated and your phoneis ready to send or receive data through its IR port. When blinks, your phoneis trying to connect to the other device or a connection has been lost.Data cable transferYou can transfer data from your phone to a compatible PC or from a compatiblePC to your phone using a CA-53 USB data cable.Important: Disconnect the USB data cable from the phone to make a call.Enable default mode connectionConnect to your PC in Nokia mode to transfer phone data and files between yourphone and PC using Nokia PC Suite.1. Connect your PC and your phone with a CA-53 USB data cable. A notificationappears on the display asking which mode you want to select.2. Select USB mode: Nokia mode. A notification appears on the display statinga connection is active.You can now use PC Suite to connect to your phone.