Nokia 6300b User Manual

Also see for 6300b: Service manual Service manual Service manual Service manual Sevice manual

Nokia 6300b User Manual Manual pdf 10 page image

2. Insert the card into the microSD card slot with the contact surface facing down, and press it until itlocks into place.3. Close the back cover of the device.Remove the microSD cardImportant: Do not remove the memory card in the middle of an operation when the card is being accessed. Removingthe card in the middle of an operation may damage the memory card as well as the device, and data stored on thecard may be corrupted.You can remove or replace the microSD card during phone operation without switching the device off.1. Make sure that no application is currently accessing the microSD memory card.2. Remove the back cover of the device.3. Press the microSD card slightly in to release the lock.4. Remove the microSD card from the slot.Charge the batteryCheck the model number of any charger before use with this device. This device is intended for use when supplied with powerfrom the AC-3 or AC-4 charger.Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. Theuse of any other types may invalidate any approval or warranty, and may be dangerous.For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of anyenhancement, grasp and pull the plug, not the cord.1. Connect the charger to a wall socket.2. Connect the lead from the charger to the socket on the bottom of your device.If the battery is completely discharged, it may take a few minutes before the charging indicator appearson the display or before any calls can be made.The charging time depends on the charger used. Charging a BL-4C battery with the AC-3 charger takesapproximately 2 hours and 45 minutes while the device is in the standby mode.Standby and talk timeStandby time* up to 350 hoursTalk time* up to 3.5 hours* Be aware that the battery talk and standby times information is subject to change. For more information, contact your serviceprovider.Battery talk and standby times are estimates only and depend on signal strength, network conditions, features used, batteryage and condition, temperatures to which battery is exposed, use in digital mode, and many other factors. The amount of timea device is used for calls will affect its standby time. Likewise, the amount of time that the device is turned on and in the standbymode will affect its talk time.Switch the device on and offTo switch the device on or off, press and hold the power key.If the device prompts for a PIN or a UPIN code, enter the code (displayed as ****), and select OK.The device may prompt you to set the time and date. Enter the local time, select the time zone of your location in terms of thetime difference with respect to Greenwich mean time (GMT), and enter the date. See "Time and date," p. 22.When you switch on your device for the first time and the device is in the standby mode, you may be prompted to get theconfiguration settings from your service provider (network service). For more information refer to Connect to support. See"Configuration," p. 26. See "Configuration setting service," p. 7.G e t s t a r t e d© 2007 Nokia. All rights reserved. 9