[ 66 ]Receive a TTY call1 Make sure the TTY and phone are connected.2 When the phone vibrates (if vibrate is on), press to answer thecall, and then type your response on the TTY.3 To hang up, press on the phone.• OPTIONAL HEADSETSThe HDC-9P and HDE-1 headsets can be purchased separately as accessories.Connect the headset1 Plug the headset jack into the accessoryconnection on the bottom end of your phone.2 Place the round headset ear plug in your ear.With the headset connected, you can make,answer, and end calls as usual.• Use the keypad to enter numbers• Press to place a call• Press to end a callWhen in use, the headset microphone hangs atthe side of your head. Although it may seem farfrom your mouth, you can speak at normal volume.VOICE DIAL A NUMBER WITH THE HDC-9P HEADSETOnce you have voice tagged entries in your Phone book, you can make acall with the HDC-9P headset by simply pressing and holding the remotebutton on the microphone. See “Assign a voice tag” on page 53 forinformation on setting up voice tags if you have not already.1 At the Start screen, press and hold the remote button on the headset.Your phone beeps and Please speak now appears in the display.2 Within 3 seconds, pronounce the voice tag into the microphone.Once the voice tag is recognized, the tagged entry appears in thedisplay, replays through the earpiece, and the number is dialed.
