Tools86ToolsSettingsTo change settings, press , and selectTools > Settings. Scroll to a setting group, and pressto open it. Scroll to a setting you want to change, andpress .Phone settingsGeneralPhone language—Changing the language of the displaytexts in your phone also affects the format used for dateand time and the separators used, for example, incalculations. Automatic selects the language accordingto the information on your SIM card. After you change thedisplay text language, the phone restarts.Changing the settings for Phone language or Writinglanguage affects every application in your phone, and thechange remains effective until you change these settingsagain.Writing language—Changing the language affects thecharacters and special characters available when writingtext and the predictive text dictionary used.Dictionary—You can set the predictive text input On or Offfor all editors in the phone. The predictive text dictionaryis not available for all languages.Welcome note or logo—The welcome note or logo isdisplayed briefly each time you switch on the phone. SelectDefault to use the default image, Text to write a welcomenote (up to 50 letters), or Image to select a photo orpicture from Gallery.Orig. phone settings—You can reset some of the settingsto their original values. To do this, you need the lock code.See ‘Security’, ‘Phone and SIM’, p. 92. After resetting, thephone may take a longer time to power on. Documents andfiles are unaffected.Standby modeLeft selection key—To assign a shortcut to the leftselection key ( ) in the standby mode, select anapplication from the list.R1105_en.book Page 86 Monday, February 7, 2005 1:31 PM