Tools87Right selection key—To assign a shortcut to the rightselection key ( ) in the standby mode, select anapplication from the list.You can also assign keypad shortcuts for the differentpresses of the scroll key, by selecting an application fromthe list.Operator logo—This setting is visible only if you havereceived and saved an operator logo. You can choose if youwant the operator logo to show or not.DisplayBrightness—You can changethe brightness of the displayto lighter or darker. Thebrighness of the display isautomatically adjustedaccording to theenvironment.Screen saver timeout—Thescreen saver is activatedwhen the timeout period isover.Light time-out—Select a timeout after which the backlightis switched off.Call settingsSend my caller ID (network service)—You can set yourphone number to be displayed to (Yes) or hidden from (No)the person to whom you are calling, or the value may beset by your network operator or service provider when youmake a subscription (Set by network).Call waiting (network service)—If you have activated callwaiting, the network notifies you of a new incoming callwhile you have a call in progress. Select Activate torequest the network to activate call waiting, Cancel torequest the network to deactivate call waiting, or Checkstatus to check if the function is active or not.Reject call with SMS—Select Yes to send a text message toa caller informing why you could not answer the call. See‘Answer or reject a call’, p. 22.Message text—Write a text to be sent in a text messagewhen you reject a call.Image in video call—You can deny video sending when youreceive a video call. Select a still image to be displayedinstead of video.Tip! To change the settings for call diverting, press, and select Tools > Settings > Call divert. See ‘Calldiverting’, p. 94.R1105_en.book Page 87 Monday, February 7, 2005 1:31 PM