To set the device to indicate when it is used in a microcellularnetwork (MCN), select Cell info display > On.Video sharingVideo sharing requirementsVideo sharing requires a UMTS connection. For moreinformation on the service, UMTS network availability, andfees associated with using this service, contact your serviceprovider.To use video sharing you must do the following:● Ensure that your device is set up for person-to-personconnections.● Ensure you have an active UMTS connection and are withinUMTS network coverage. If you move outside the UMTSnetwork during a video sharing session, the sharing stopswhile your voice call continues.● Ensure that both the sender and recipient are registeredto the UMTS network. If you invite someone to a sharingsession and the recipient’s device is not within UMTSnetwork coverage, does not have video sharing installed,or person-to-person connections set up, the recipient doesnot receive invitations. You receive an error message thatindicates that the recipient cannot accept the invitation.Share live video or video clipsDuring an active voice call, select Options > Share video.1. To share live video during the call, select Live video.To share a video clip, select Video clip and the clip youwant to share.You may need to convert the video clip into a suitableformat to be able to share it. If your device notifies youthat the video clip must be converted, select OK. Yourdevice must have a video editor for the conversion towork.2. If the recipient has several SIP addresses or phonenumbers including the country code saved in the contactslist, select the desired address or number. If the SIPaddress or phone number of the recipient is not available,enter the address or number of the recipient including thecountry code, and select OK to send the invitation. Yourdevice sends the invitation to the SIP address.Sharing begins automatically when the recipient acceptsthe invitation.Options during video sharingZoom the video (available for sender only).Adjust the brightness (available for sender only).or Mute or unmute the microphone.or Turn the loudspeaker on and off.or Pause and resume video sharing.Switch to full screen mode (available for receiveronly).3. To end the sharing session, select Stop. To end the voicecall, press the end key. When you end the call, videosharing also ends.To save the live video you shared, select Yes when prompted.The device notifies you of the location of the saved video.© 2009 Nokia. All rights reserved.26