11. CameraCapture an imageSelect > Camera. The screen is automatically rotated tolandscape mode.To capture an image, use the display as a viewfinder, andpress the capture key. The device saves the image in Gallery.To zoom in or out before capturing an image, use the volumekeys.To focus on the subject before capturing the image, press thecapture key halfway down.The toolbar provides you with shortcuts to different itemsand settings before and after capturing an image orrecording a video clip. Select from the following:Switch between video and image mode.Select the scene.Activate panorama mode.Turn the video light on (video mode only).Select the flash mode (images only).Activate the self-timer (images only).Activate sequence mode (images only).Select a colour effect.Adjust the white balance.Go to Photos.The available options vary depending on the capture modeand view you are in. The settings return to the default valueswhen you close the camera.To customise the camera toolbar, select Options >Customise toolbar.To activate the toolbar when it is hidden, press the scroll key.Panorama modeSelect panorama mode from the toolbar.To start capturing a panoramic image, press the capture key.Slowly turn the camera left or right to start capturing thepanoramic image. A panorama preview is displayed and thecamera captures the image as you turn. The green arrowindicates that you can slowly proceed to turn. The red pausemark indicates that you should stop moving until the greenarrow is displayed again. You can predict when the next keyframe will be captured when the red rectangle moves to thecentre of the preview area.To complete the capture, press the capture key or selectStop. The panoramic capture stops automatically when themaximum image width has been reached.Record videos1. If the camera is in the image mode, select the video modefrom the toolbar.© 2009 Nokia. All rights reserved.38