[ 91 ]Network settingsNetwork feature settingThis menu allows you to enable or disable various network services(Call Forwarding, Call Waiting, Send Own Caller ID) through the useof special feature codes provided to you by your service provider.You must first store the feature code given to you by your service provider(unless already pre-programmed) before the feature appears in the menuor functions properly.Important! Only those menu features that have been activated will appearin the menu; therefore the menu shortcuts in the following sections maynot always reflect the actual position in the menu as described below (oras shown on page 16).Storing the feature code1. Press Menu 4-5-3 (Settings - Network services - Network featuresettings), then press Select.2. Enter the feature code for the desired feature (for example: -- to activate Call Forwarding, then press Select.3. To locate the type of Call Forwarding associated with the code, pressSelect, or use the Navi roller and scroll to Call waiting or Send owncaller ID when calling, and press Select.4. Select the command associated with the feature code you wish to store(Activate, Cancel, Yes or No) and press Select to complete the process.Call forwardingThis network service allows you to forward your incoming calls to anothernumber (for example, your office number). For more information andfeature codes, contact your service provider.Once you activate this feature by entering the proper feature code, youcan select one of the following forwarding modes: Forward all calls,Forward calls if number busy, Forward calls if not answered, Forwardcalls if out of reach or phone is off, and Cancel all call forwarding. See“Call forwarding” on page 37 for a description of the features listed above.
