1. Make sure that no application is currently accessing the microSDmemory card.2. Remove the back cover of the device.3. Press the microSD card slightly in to release the lock, and remove it.Charge the batteryCheck the model number of any charger before use with this device. Thisdevice is intended for use when supplied with power from the AC-3 andAC-4 charger.The exact charger model number may vary depending on the type of plug.For example, the model numbers for the AC-3 charger can be, among others,AC-3C, AC-3U, AC-3X.Warning: Use only batteries, chargers, and enhancements approvedby Nokia for use with this particular model. The use of any other types mayinvalidate any approval or warranty, and may be dangerous.For availability of approved enhancements, please check with your dealer.When you disconnect the power cord of any enhancement, grasp and pullthe plug, not the cord.1. Connect the charger to a wall socket.2. Connect the lead from the charger to thecharger connector of your phone.If the battery is completely discharged, itmay take a few minutes before the chargingindicator appears on the display or beforeany calls can be made.The charging time depends on the chargerused. Charging a BL-4CT battery with theAC-4 charger takes about 1 hour 30 minuteswhile the phone is in the standby mode.Get started13 Get started