1. In the standby mode, press and hold the right selection key or thevolume down key. A short tone sounds, and Speak now is displayed.2. Speak the name of the contact you want to dial. If the voice recognitionis successful, a list with matches is shown. The phone plays the voicecommand of the first match on the list. If it is not the correct command,scroll to another entry.Options during a callMany of the options that you can use during a call are network services. Foravailability, contact your service provider.During a call, select Options and from the following options:Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record,Voice clarity, Loudspeaker or Handset.Network options are Answer or Reject, Hold or Unhold, New call, Add toconference, End call, End all calls, and the following:● Send DTMF — to send tone strings● Swap — to switch between the active call and the call on hold● Transfer — to connect a call on hold to an active call and disconnectyourself● Conference — to make a conference call● Private call — to have a private discussion in a conference callWarning: Do not hold the device near your ear when theloudspeaker is in use, because the volume may be extremely loud.Calls22 Calls