C a l l f u n c t i o n s24Call options are Mute or Unmute, Contacts, Menu, Lock keypad,Record, Loudspeaker or Handset.Network services options are Answer or Reject, Hold or Unhold, Newcall, Add to conference, End call, End all calls, and the following:Send DTMF — to send tone stringsSwap — to switch between the active call and the call on holdTransfer — to connect a call on hold to an active call and disconnectyourselfConference — to make a conference callPrivate call —to discuss privately in a conference callWarning: Do not hold the device near your ear when theloudspeaker is in use, because the volume may be extremely loud.■ Make a video callWhen you make a video call, you send a real-time video to therecipient of the call. The video image captured by the camera on theback of your phone is shown to the video call recipient.To be able to make a video call, you must have a USIM card and beconnected in a WCDMA network. For availability of and subscriptionto video call services, contact your network operator or serviceprovider. A video call can only be made between two parties. Thevideo call can be made to a compatible phone or an ISDN client. Videocalls cannot be made while another voice, video, or data call is active.1. To start a video call, enter the phone number in the standby mode,or select Contacts and a contact.2. Press and hold the call key, or select Options > Video call.Starting a video call may take a while. Video call and an outgoinganimation is shown. If the call is not successful (for example,video calls are not supported by the network, or the receivingdevice is not compatible) you are asked if you want to try a normalcall or send a message instead.Tip: To increase or decrease the volume during a call, pressthe volume keys.