M e s s a g i n g28device, you need a compatible e-mail system. Your device supports POP3and IMAP4 e-mail servers.Before you can send and retrieve any e-mail messages, you must obtaina new e-mail account or use your current account.You can set up a maximum of five e-mail accounts on your device. Eachaccount is stored as a separate mailbox.Set up a mailboxSelect Menu > Messaging > E-mail message > Settings > Options >New account and from the following:Account name — Enter a name for your mailbox.Protocol — Select the protocol recommended by your service provider.User name — Enter the user name of your e-mail address(username@domainname).Password — Enter a password. If you leave this field blank, you areprompted for the password when you try to connect to your remotemailbox.Incom. domain name — Enter the IP address or host name of the mailserver that receives your mail.Incoming port — Define a port for incoming mail.SMTP domain name — Enter the IP address or host name of the mailserver that delivers your mail.Outgoing SMTP port — Define a port for outgoing mail.E-mail address — Enter your e-mail address.Save on server — Save recently received messages on the server.Receive unread only — Your mailbox receives unread messages only.Download — Read downloaded messages on your device, or viewdownloaded titles and read the complete messages online.Maximum size per mail — Define the maximum size per mailN8208_EN_MEA_RUIM_Generic_Gold_03182009.fm Page 28 Wednesday, April 1, 2009 12:25 PM