P h o n e b o o k ( N a m e s )11• select whether to keep orerase the original name andphone number and pressSelect.• Scroll to the name and/orphone number to copied.Press Copy to start copying orBack to cancel the operation.If you select Copy all• select whether to keep orerase the original names andphone numbers and pressSelect.• Press OK to start copying orBack to cancel the operation.If the name is too long for the targetphone book, then name is shortened.If the name already is in the targetphone book with a different phonenumber, an ordinal number is addedto the end of the name. Erasing a name andphone numberYou can remove names and phonenumbers from the selected phonebook one by one or all at once.One by one1. In the standby mode, pressNames.2. Scroll to Erase and press Select.3. Scroll to One by one and pressSelect.4. Scroll to the name and phonenumber you want to erase. PressErase and then confirm with OK.Erase all1. In the standby mode, pressNames.2. Scroll to Erase and press Select.3. Scroll to Erase all and pressSelect.4. Select the memory to be erased,Phone or SIM card. Press Select.5. At the prompt Are you sure?,press OK.6. Key in the security code and pressOK.For more information about thesecurity code, see ‘ReferenceInformation’ - ‘Access Codes’. Assigning a phonenumber as a speed dialnumberThe first nine names and phonenumbers stored in phone book areautomatically saved as speed dialnumbers and can be speed dialledvia the number keys - .If you want to assign anothernumber to a speed dial key, take thefollowing steps:1. Press Names and select SpeedDials. If no phone number isassigned to a key, press Assign.