50Phone SYSTEM NAME or LOGO - The wireless system you are currently using.and bar - The current signal strength at your location. The more bars visible,the stronger the signal.and bar - Battery charge level. The more bars visible, the more charge there isin the battery.- The phone keypad is locked or the lock code is active.- The phone will not ring to notify you of an incoming call.- You have received one or several new voice messages.- You have received one or several new short messages.- You have received one or several new faxes.- Infrared transmission is active.- Call forwarding is active.Make a callTo make and receive calls,• the phone must be switched on,• the communicator must have a valid SIM card fitted, and• you must be located in a service area of the wireless system.Tip: When a call is active,you can use the andkeys to lower or raisethe volume level of theearpiece.1 Key in the area code and the phone number of the person you wish to call.If you make a mistake, you can remove the digits one at a time by pressingClear repeatedly. To clear the whole display, press and hold Clear.2 Press to dial the phone number.3 To end the call, press .
