Nokia 9300 User Manual

Also see for 9300 - Smartphone 80 MB: Modem Functions E-mail guide Setup instructions User guide User guide

Contents

8 — Joystick. Move the joystick to the left, right, up or down to scroll through different lists. Press the center of the joystick toselect or to perform the function of an underlined command button. To change the acceleration or the speed at which thecursor moves, select Desk → Tools → Control panel → General → Display → Cursor settings.9 — Sync key. Establish a connection, and press Chr+ to synchronize your device with a compatible PC.Tip: You can use the arrow keys or the joystick to move on the menus and the display, for example in the Webapplication. The left arrow key is on the Bluetooth key (4), the up and down arrow keys on the zoom keys (5), andthe right arrow key on the infrared key (6).Tip: Press Esc to cancel selections and close dialogs.Tip: Press the backspace key to delete items such as calendar entries and messages.The communicator display turns on when you open the cover. The application that was active the last time the device wasused is shown on the display. When you close the cover, the communicator display turns off.Desk main view1 — Menu. Press the Menu key to open the menu. You can use the joystick or the arrow keys to move in the menu, and pressthe enter key to select a menu option.2 — Folder. You can group applications, shortcuts, and notes to different folders. See Creating new groups on page 21.3 — Scroll bar. For example, if you have a long file in Documents, the scroll bar helps you estimate where you are in the file,and how much of the file you can see. The longer the scroll bar, the more you can see of the file.4 — Command buttons. The commands on the right side of the display correspond to the command buttons. Note that whena command is dimmed, it cannot be used.5 — Application. To open an application from Desk, select the application, and press Open or the enter key.6 — Indicator area. The indicator area shows application and system-related information.Multipage dialog1 — Dialog pages. You can move from one page to another by pressing the menu key.2 — Selection list. You can view different options in a selection list, and select one of them.3 — Command buttons. You can use the command buttons to perform functions on a dialog page, or in a selection list.If there is more than one frame on the display, the selected frame is always highlighted. You can move between the framesby pressing the tab key.Switching between open applicationsTo switch between open applications, press Menu, select , and select the application. You can also close applications in theapplication list.Tip: Press Chr+the tab key to switch between open applications. Press Chr+the tab key again to move in the list.About the displayA small number of missing, discolored, or bright dots may appear on the screen. This is a characteristic of this type of display.Some displays may contain pixels or dots that remain on or off. This is normal, not a fault.About the Menu keyThe communicator keyboard has a Menu key. Press the Menu key to access the various menu options. The options availabledepend on the application you are in. The chosen option affects the item that is currently selected or open. In multipagedialogs you can use the Menu key to move from one page to another.G e t t i n g s t a r t e dCopyright © 2004 Nokia. All Rights Reserved. 12