ClockIn Clock, you can view the date and time of your homeand destination city, and manage clock alarms.Go to Desk → Clock.Using world clockTo set the date and time, press Menu, and select Tools→ Date and time....Tip: You can also update date and timeautomatically (network service). You can selectthis setting in Control panel. See Date and timeon page 73.To switch between the home and destination cityinformation, press the tab key.To change a city, select either the home or destinationcity, and press Change city.Tip: If you change the home city, the clock andcalendar entries are updated. This is useful forexample when you want to attend phoneconferences.To view and manage alarms, press Alarm clock.To change the clock type, press Menu, and select View→ Clock type, and select Analog or Digital.Tip: To change to the one-clock view whichshows only your home city information, pressMenu, and select View → Remote city details.Using Alarm clockIf the alarm time is reached while the device isswitched off, the device switches itself on and startssounding the alarm tone. If you press Stop/Stop, thedevice asks whether you want to activate the device forcalls. Press No to switch off the device or Yes to makeand receive calls. Do not press Yes when wirelessphone use may cause interference or danger.To set an alarm, press New alarm, and enter the alarmtime.To modify an alarm, press Edit alarm.To remove an alarm, press the backspace key.When the alarm sounds, press Stop to turn it off. PressSnooze to postpone the alarm.95 ClockCyanCyan MagentaMagenta YellowYellow BlackBlackfile:///C:/USERS/MODEServer/chari/4693500/rae-6_mini/en/issue_1/rae-6_mini_en_1.xml Page 95 Nov 23, 2004 11:49:43 AM
