4 Line up the contacts of the battery andthe battery compartment, and insertthe battery.5 To replace the back cover, direct thetop locking hooks toward their slotsfirst and then press down until thecover locks into place.Insert or remove a memory cardKeep all memory cards out of the reach ofsmall children.Insert a memory card1 Switch the device off.2 Remove the back cover of the device.3 If the battery is inserted, lift thebattery out.4 Insert a compatible memory card intothe slot. Make sure the contact area ofthe card is facing down.5 Push the card in, until it clicks.6 Replace the battery and the backcover. Make sure the cover is properlyclosed.You can record high-definition videoswith your device. If you are recording avideo to a memory card, for the bestperformance, use fast, high-qualitymicroSD cards from knownmanufacturers. The recommendedmicroSD card class is 4 (32Mbit/s (4MB/s))or higher.Remove a memory card1 Switch the device off.2 Remove the back cover of the device.3 If the battery is inserted, lift thebattery out.4 Push the card in, until you hear a click.5 Pull the card out.ChargingCharge the batteryYour battery has been partially charged atthe factory, but you may need to rechargeit before you can switch on your device forthe first time.8 Get started