2 Connect the charger cable to the charger connector on the headset. The redindicator light turns green when the battery is fully charged. Charging the batteryfully may take up to 2 hours.3 Disconnect the charger from the headset, then unplug from the wall outlet.The fully charged battery has power for up to 6 hours of talk time or up to 120 hoursof standby time.When the battery charge is low, you hear a voice prompt, the headset beeps every 5minutes, and the red indicator light flashes. When the battery is charging, the redindicator light is on.Check the battery chargeMake sure the headset is switched on, then press . A green light indicates asufficient charge level. If the light is yellow, you may need to recharge the batterysoon. If the light is red, recharge the battery.Switch the headset on or offSwitch onPress and hold for 2 seconds. The headset beeps, and a green indicator lightflashes once.The headset connects to the last connected phone or other device. If you have neverpaired the headset, or you have cleared the pairings, the headset switches to pairingmode.Switch offPress and hold for 5 seconds. The headset beeps, and a red indicator light flashesonce.If not connected to a phone within 30 minutes, the headset switches off.Pair and connect the headset to your phoneBefore using the headset, you must pair and connect it to a compatible phone.1 Switch the headset off.2 Switch your phone on.3 If you have never paired the headset, or you have cleared the pairings, switch theheadset on.If you have previously paired your headset with a device, press and hold for 5seconds.5