Automatic redial — Set your device to make a maximum of 10 attempts to connectthe call after an unsuccessful call attempt. To stop automatic redialling, press theend key.Show call duration — Display the length of a call during the call.Summary after call — Display the length of a call after the call.Speed dialling — Activate speed dialling.Anykey answer — Activate anykey answer.Line in use — This setting (network service) is shown only if the SIM card supportstwo subscriber numbers, that is, two phone lines. Select which phone line you wantto use for making calls and sending text messages. Calls on both lines can beanswered irrespective of the selected line. If you select Line 2 and have notsubscribed to this network service, you are not able to make calls. When line 2 isselected, is displayed in the home screen.Line change — Prevent line selection (network service), if supported by your SIM card.To change this setting, you need the PIN2 code.Network settingsSelect > Settings and Settings > Phone > Network.To select the network mode, select Network mode > Dual mode, UMTS, or GSM. Indual mode, the device switches automatically between networks.Tip: Selecting UMTS enables faster data transfer, but may increase the demand onbattery power and reduce the battery life. In regions close to both GSM and UMTSnetworks, selecting Dual mode may cause constant jumping between the twonetworks, which also increases the demand on battery power.To select the operator, select Operator selection > Manual to select from availablenetworks, or Automatic to set the device to select the network automatically.To set the device to indicate when it is used in a microcellular network (MCN), selectCell info display > On.ContactsStay connected with your online friendsYou can synchronise the contact information on your device with contacts you haveon Facebook. You can also create a new Facebook account directly from your device.Contacts 33