Add to album — Add the image you captured to album.Show captured image — View the image after it is captured, or continue imagecapturing immediately.Default image name — Define the default name for captured images.Extended digital zoom — Set extended digital zoom.Capture tone — Set the tone that sounds when you capture an image.Memory in use — Select where to store your images.Restore camera settings — Restore the camera settings to the default values.Capture images in a sequenceSelect > Camera.Sequence mode is available only in the main camera. To use sequence mode, youneed to have enough memory available.Set the camera to capture images in a sequenceFrom the active toolbar, select Sequence mode. Select the desired capturefrequency.Deactivate sequence modeFrom the active toolbar, select Sequence mode > Single shot.The captured images are displayed in a grid. To view an image, select the image. Toreturn to the sequence mode viewfinder, press Back.You can also use sequence mode with the self-timer.Panorama modeSelect > Camera.Select panorama mode from the active toolbar.1 To capture the first image in the panorama, press the capture key.2 Slowly turn the device left or right as indicated by the arrows.A panorama preview is displayed and the camera captures the image as you turn.The green arrow indicates that you can slowly proceed to turn. The red pausemark indicates that you should stop moving until the green arrow is displayedagain. You can predict when the next key frame is captured when the red rectanglemoves to the centre of the preview area.Camera 79