for the international access code may not work in all regions. In this case, enterthe international access code directly.2. To make the call, press the call key.3. To end the call (or to cancel the call attempt), press the end key.Pressing the end key always ends a call, even if another application is active.To make a call from the contacts list, select Menu > Contacts. Go to the desiredname. Or, select the search field, enter the first letters or characters of the name,and go to the name. To call the contact, press the call key. If you have saved severalnumbers for a contact, select the desired number from the list, and press the callkey.During a callMute or unmute the microphone — Select or .Put an active voice call on hold — Select or .Activate the loudspeaker — Select . If you have attached a compatibleheadset with Bluetooth connectivity, to route the sound to the headset, selectOptions > Activate BT handsfree.Switch back to the handset — Select .End a call — Select .Switch between active and held calls — Select Options > Swap.Tip: To put an active call on hold, press the call key. To activate the held call,press the call key again.Send DTMF tone strings1. Select Options > Send touch tones.2. Enter the DTMF string or search for it from the contacts list.3. To enter a wait character (w) or a pause character (p), press * repeatedly.4. To send the tone, select OK. You can add DTMF tones to the phone number orDTMF field in contact details.End an active call and replace it with another incoming call — SelectOptions > Replace.End all calls — Select Options > End all calls.Many of the options that you can use during a voice call are network services.Make calls© 2010 Nokia. All rights reserved.2611/09/2010FCC Draft
