G e t s t a r t e d15If the ignition sense wire is not connected, press and hold for about 5seconds to switch off the car kit. If the ignition sense wire is notconnected and you disconnect your device from the car kit (for example,to take it with you), the car kit automatically switches off after 2minutes.After you turn off the car ignition, do not leave the phone or musicplayer connected to the car kit to prevent accidental draining of the carbattery. If the phone or music player is left connected to the car kit, thecar kit automatically switches off after 12 hours.■ First time useWhen you switch on the car kit for the first time, you are asked to selectthe desired language for the texts on the car kit display. Turn the wheelto scroll to the desired language, and press the wheel.After the language selection, you are asked to pair and connect the carkit with a compatible device using Bluetooth wireless technology. Seealso steps 3 to 5 in “Pair and connect the car kit”, p. 15.When your device is connected to the car kit, you are prompted to copythe contacts from the device to the car kit. To start the copying, selectYes. If you select No, you cannot use your saved contacts to make callswith the car kit. To copy the contacts later, see “Copy contacts to carkit”, p. 24.■ Pair and connect the car kitBefore using the car kit, you must associate (pair) and connect it with acompatible mobile phone or music player that supports Bluetoothwireless technology. See also “Bluetooth wireless technology”, p. 10.When you use your device with the car kit, secure the device in the carusing a compatible mobile holder. However, you can maintain theBluetooth connection in the car even if you keep your device, forexample, in a handbag.To charge the battery in your compatible Nokia device while using thecar kit, connect the device to the car kit using the supplied chargingcable.
