I n s t a l l a t i o n40Do not mount the hands-free unit inside a metal housing or on a metalsurface, because this will impair the Bluetooth connection between thehands-free unit and the Bluetooth device that is connected to the carkit. For an optimal connection, ensure that the distance between thehands-free unit and a metal surface is over 4 mm (0.16 inch).Install the hands-free unit in the car using suitable mounting material(not supplied in the sales package). Ensure that the hands-free unitstays securely in place.Input device CU-10The input device should be located so that it is within easy reach of theuser. Do not mount the input device within the head impact area.Ensure that the input device cable reaches to the hands-free unit forconnection. The best location to mount the input device is horizontallyon the console between the driver’s and front passenger's seat so thatthe input device keys are toward the front of the vehicle.To mount the input device:1. Attach the supplied tape pad to the desired location in the car: peeloff the protective sheet from a side of the pad, and press the pad intoplace.When you peel off the protective sheet, do not touch the adhesiveside with a finger. Ensure that the surface where you attach the padis dry and free from dirt and dust.2. Peel off the protective sheet from the pad on the underside of theinput device and from the other side of the pad attached to the car.3. Press the pads firmly against each other, and check that the inputdevice stays securely in place.Display SU-34The display should be located so that it is clearly visible for the user andit can be easily rotated left, right, up, or down.
