To edit the copy and synchronize settings, select acontact from the transfer contact list and Options >Edit.To delete a transfer contact, select it from the transfercontact list and Options > Delete.Data transfer with acompatible deviceFor synchronization use Bluetooth wireless technologyor a cable connection. The other device must beactivated for receiving data.To start data transfer, select Menu > Settings >Connectivity > Data transfer and the transfer contactfrom the list other than Server sync or PC sync.According to the settings, the selected data is copied orsynchronized.Synchronize from a PCTo synchronize data from calendar, notes, and contacts,install the Nokia PC Suite software of your device on acompatible PC. Use Bluetooth wireless technology or aUSB data cable to connect your device with the PC andstart the synchronization from the PC.Synchronize from a serverTo use a remote internet server, subscribe to asynchronization service. For more information and thesettings required for this service, contact your serviceprovider. You may receive the settings as aconfiguration message. See "Configuration settingservice," p. 12.1. To start the synchronization from your device, selectMenu > Settings > Connectivity > Datatransfer > Server sync.2. Depending on the settings, select Initialisingsync or Initialising copy.Synchronizing for the first time or after an interruptedsynchronization may take up to 30 minutes tocomplete.USB data cableYou can use the USB data cable to transfer data betweenthe device and a compatible PC or a printer supportingPictBridge. You can also use the USB data cable withNokia PC Suite.To activate the device for data transfer or imageprinting, connect the data cable. Confirm "USB datacable connected. Select mode." and select from thefollowing options:• Nokia mode — to use the device for PC Suite• Printing & media — to use the device with aPictBridge compatible printer or with yourcompatible PC• Data storage — to connect to a PC that does nothave Nokia software and use the device as a datastorage deviceTo change the USB mode, select Menu > Settings >Connectivity > USB data cable and the desired USBmode. 45 Settings