To change the password used for restricting voice, fax, and data calls, selectOptions > Edit restriction passwd.. Enter the current code, then the new codetwice. The restriction password must be four digits long. For details, contact yourservice provider.Voice dialingYour device supports enhanced voice commands. Enhanced voice commands arenot dependent on the speaker’s voice, so you do not need to record voice tags inadvance. The device creates a voice tag for the entries in the contacts, and comparesthe spoken voice tag to it. The voice recognition in the device adapts to the mainuser’s voice to recognize the voice commands better.The voice tag for a contact is the name that is saved for the contact.To listen to the synthesized voice tag, select a contact and Options > Viewdetails > Options > Voice tag details > Options > Play voice tag.Note: Using voice tags may be difficult in a noisy environment or during anemergency, so you should not rely solely upon voice dialing in all circumstances.Make a call with a voice tagWhen you use voice dialing, the loudspeaker is in use. Hold the device at a shortdistance away when you say the voice tag.1 To start voice dialling, in the home screen, press and hold the right selectionkey. If a compatible headset with the headset key is attached, press and holdthe headset key to start voice dialing.2 A short tone sounds, and Speak now is displayed. Say clearly the name that issaved for the contact.3 The device plays a synthesized voice tag for the recognized contact, and displaysthe name and number. If you do not want to call that contact, select anothercontact from the list of matches within 2.5 seconds, or, to cancel, select Quit.46 Make calls
