Nokia E52 User Manual
Also see for E52: User guideUser guideSpecificationsUser guideService manual
                                                                                                                                                                                                         | |
Contents
| 
3 Use your car kit to start a search for compatible devices. For instructions, see theuser guide of your car kit.4 Select your device from the list of compatible devices.5 To pair the devices, enter the Bluetooth passcode shown on the display of the carkit to your device.Tip: If you have already accessed the SIM card from the car kit with the active user profile,the car kit searches automatically for a device with the SIM card. If it finds your device,and automatic authorisation is activated, the car kit automatically connects to the GSMnetwork when you switch on the car ignition.When you activate the remote SIM access profile, you can use applications on your devicethat do not need network or SIM services.To make connections between your device and the car kit without separate acceptanceor authorisation, select Menu > Ctrl. panel > Connectivity > Bluetooth, and open thepaired devices tab. Select the car kit and Set as authorised, and answer Yes to theconfirmation query. If the car kit is set as unauthorised, connection requests from itmust be accepted separately every time.To end the remote SIM access connection from your device, select Menu > Ctrl. panel >Connectivity > Bluetooth and Remote SIM mode > Off.Wireless LANAbout WLANYour device can detect and connect to wireless local area networks (WLAN). Using aWLAN, you can connect your device to the internet and compatible devices that supportWLAN.To use a WLAN connection, you need the following:• WLAN must be available in your location.• Your device must be connected to the WLAN. Some WLANs are protected, and youneed an access key from the service provider to connect to them.• An internet access point created for WLAN. Use the access point for applications thatneed to connect to the internet.A WLAN connection is established when you create a data connection using a WLANinternet access point. The active WLAN connection ends when you end the dataconnection.You can use WLAN during a voice call or when packet data is active. You can only beconnected to one WLAN access point device at a time, but several applications can usethe same access point.Connectivity 145 |
Related manuals for Nokia E52
manualsdatabase
Your AI-powered manual search engine