Change audio themesYou can set sounds for various device events. The sounds can be tones, speech, or acombination of both.Select Menu > Ctrl. panel > Themes and Audio themes.To change the current audio theme, select Active audio theme.To add 3-D effects to the audio theme, select Options > 3-D ringing tones.To create a new audio theme, select Options > Save theme.To set a sound for an event, select an event group, such as Messaging events. Select thedesired event and from the following:Silent — Deactivate the sound of the device event.Tone — Set a tone as the sound for the device event.Speech — Set a synthesised voice tag as the sound for the device event. Enter thedesired text, and select OK.Select an event group, such as Messaging events. Select the desired event, Options, andfrom the following:Play — Play the sound before activating it.Activate sounds — Activate all the sounds in the event group.Deactivate sounds — Deactivate all the sounds in the event group.3-D ringing tonesSelect Menu > Ctrl. panel > 3-D tones.To enable three-dimensional (3-D) sound effects for ringing tones, select 3-D ringingtone effects > On. Not all ringing tones support 3–D effects.To change the 3–D effect that is applied to the ringing tone, select Sound trajectoryand the desired effect.To modify the 3–D effect, select from the following:Trajectory speed — Select the speed at which sound moves from one direction toanother. This setting is not available for all effects.Reverberation — Select the desired effect to adjust the amount of echo.Doppler effect — Select On to set the ringing tone sound higher when you are closerto your device, and lower when you are farther away. This setting is not available forall effects.36 Personalisation