Keep all memory cards out of the reach of smallchildren.Check the compatibility of a memory card withits manufacturer or provider.A compatible memory card may be included in thesales package. The memory card may be alreadyinserted in the device. If not, do the following:1. To prevent the battery from coming loose, place thedevice so that the back cover is facing up.2. Remove the back cover.3. Insert the memory card in the slot with the contactarea first. Ensure the contact area is facing theconnectors on the device.4. Push the card in until it locks into place.5. Replace the back cover.Remove the memory cardImportant: Do not remove the memory card in themiddle of an operation when the card is being accessed.Removing the card in the middle of an operation maydamage the memory card as well as the device, and datastored on the card may be corrupted.1. Press the power key briefly, and select Removememory card.2. To prevent the battery from coming loose, place thedevice so that the back cover is facing up.3. Remove the back cover.4. Press the end of the memory card to release it from thememory card slot, and remove the card.5. Replace the back cover.First start-up1. Press and hold the power key untilyou feel the device vibrate.2. If prompted, enter the PIN code orlock code, and select OK.3. When prompted, enter the country inwhich you are located and the currentdate and time. To find your country,enter the first letters of the countryname. It is important to select thecorrect country, because scheduledcalendar entries may change if youchange the country later and the newcountry is located in a different timezone.4. The Phone setup application opens. To set up anapplication, select Start. To bypass setting upapplications, select Skip repeatedly. To open thePhone setup application later, select Menu > Help >Phone setup.12 Quick start guide