3. Select WLAN security settings > WPA/WPA2 > EAP >EAP plug-in settings.Use EAP plug-insTo use an EAP plug-in when you connect to a WLAN using theaccess point, select the desired plug-in and Options >Enable. The EAP plug-ins enabled for use with this accesspoint have a check mark next to them. To not use a plug-in,select Options > Disable.To edit the EAP plug-in settings, select Options > Edit.To change the priority of the EAP plug-in settings, selectOptions > Raise priority to attempt to use the plug-inbefore other plug-ins when connecting to the network withthe access point, or Options > Lower priority to use thisplug-in for network authentication after attempting to useother plug-ins.See the device help for more information on EAP plugins.Session initiation protocol (SIP)settingsSelect Menu > Ctrl. panel > Settings and Connection >SIP settings.The session initiation protocol (SIP) is used for creating,modifying, and terminating certain types of communicationsessions with one or more participants (network service).Typical communication sessions are video sharing and netcalls. SIP profiles include settings for these sessions. The SIPprofile used by default for a communication session isunderlined.To create a SIP profile, select Options > New SIP profile >Use default profile or Use existing profile.To select the SIP profile you want to use by default forcommunication sessions, select Options > Default profile.Edit SIP profilesSelect Menu > Ctrl. panel > Settings and Connection >SIP settings.Select Options > Edit and from the following:• Profile name — Enter a name for the SIP profile.• Service profile — Select IETF or Nokia 3GPP.• Default destination — Select the destination to use forthe internet connection.• Default access point — Select the access point to use forthe internet connection.• Public user name — Enter your user name provided byyour service provider.• Use compression — Select if compression is used.• Registration — Select the registration mode.• Use security — Select if security negotiation is used.• Proxy server — Enter the proxy server settings for thisSIP profile.• Registrar server — Enter the registration server settingsfor this SIP profile.Edit SIP proxy serversSelect Options > New SIP profile or Edit > Proxy server.© 2009 Nokia. All rights reserved. 151
