Nokia E70 User Manual

Also see for E70: User guide User guide Backing up data Network guide User guide

Contents

Nokia E70 User Manual Manual pdf 43 page image

• Callback type — Select Use server no. or Use other no., according to instructions from your service provider.• Callback number — Enter your data call phone number of your device, which the callback server uses.• Use PPP compress. — Select Yes to speed up the data transfer, if it is supported by the remote PPP server.• Use login script — Select Yes, if your Internet service provider requires a login script, or if you want to automate your login.A login script is a sequence of instructions that the system follows during the login process.• Login script — Enter the login script. This setting is available only if you have selected Use login script > Yes.• Modem initialisation — Enter a command string for the connection setup, if required by your service provider.Set up an Internet access point for packet data (GPRS)1. Select Menu > Tools > Settings > Connection > Access points.2. Select Options > New access point. To use an existing access point as a basis for the new one, select Use existing settings. Tostart with an empty access point, select Use default settings.3. Define the following settings.• Connection name — Enter a descriptive name for the connection.• Data bearer — Select Packet data.• Access point name — Enter the name for the access point. The name is usually provided by your service provider or networkoperator.• User name — Enter your user name if required by the service provider. User names are often case-sensitive and providedby your service provider.• Prompt password — Select Yes to enter your password each time you log into a server or No to save the password in yourdevice memory and automate the login.• Password — Enter your password if required by the service provider. The password is often case-sensitive provided bythe service provider.• Authentication — Select Secure to always send your password encrypted or Normal to send your password encryptedwhen possible.• Homepage — Enter the Web address of the page you want to display as a home page when you use this access point.4. After defining the settings, select Options > Advanced settings to define the advanced settings or Back to save the settingsand exit.Advanced Internet access point settings for packet data (GPRS)After setting up a basic Internet access point for packet data (GPRS), select Options > Advanced settings, and define the followingadvanced settings.• Network type — Select IPv4 or IPv6 as the Internet protocol type. The Internet protocol defines how data is transferred toand from your device.• Phone IP address — Enter the IP address of your device. Select Automatic to have the network provide the device IP address.This setting is shown only if you select Network type > IPv4.• DNS address — Enter the IP addresses of the Primary DNS address and Secondary DNS addr. if required by your service provideror network operator. Otherwise, the name server addresses are provided automatically.• Proxy serv. address — Enter the address of the proxy server. Proxy servers are intermediate servers between a browsingservice and its users, which are used by some service providers. These servers may provide additional security and speed upaccess to the service.Set up an Internet access point for wireless LAN1. Select Menu > Tools > Settings > Connection > Access points.2. Select Options > New access point. To use an existing access point as a basis for the new one, select Use existing settings. Tostart with an empty access point, select Use default settings.3. Define the following settings.• Connection name — Enter a descriptive name for the connection.• Data bearer — Select Wireless LAN.• WLAN netw. name — To enter the service set identifier (SSID), that is, the name that identifies the specific wireless LAN,select Enter manually. To select the network from the wireless LANs in range, select Search for netw..• Network status — Select Hidden if the network you are connecting to is hidden, or Public if it is not hidden.• WLAN netw. mode — If you select Infrastructure, devices can communicate with each other and with wired LAN devicesthrough a wireless LAN access point. If you select Ad-hoc, devices can send and receive data directly with each other, andno wireless LAN access point is needed.• WLAN security mode — You must select the same security mode that is used in the wireless LAN access point. If you selectWEP (wired equivalent privacy), 802.1x, or WPA (Wi-Fi protected access), you must also configure the relevant additionalsettings.• WLAN security sett. — Edit the security settings for the selected WLAN security mode.C o n n e c t i v i t yCopyright © 2006 Nokia. All Rights Reserved. 43