access point from a list of connections when aconnection is established.1. In the application in which you want to create a VPNconnection, select a VPN access point as the access point.2. If you are using legacy authentication, enter your VPNuser name and passcode or password. If the SecurID tokenhas become out of synchronisation with the clock of theACE/Server, enter the next passcode. If you are usingcertificate-based authentication, you may have to enterthe key store password.Barcode readerSelect Menu > Tools > Barcode.Use the Barcode reader application to decode different typesof barcodes. The codes may contain information such as URLlinks, e-mail addresses, and phone numbers. The Barcodereader uses the camera in your device to scan codes.To scan a code, select Scan code, and set the code betweenthe red lines on the display. The decoded informationappears on the display.To save the scanned data, select Options > Save. The datais saved in .bcr format.To view previously saved, decoded information in the mainview, select Saved data.Security and data management© 2008 Nokia. All rights reserved.122
