2. Insert the memory card in the slot with the contact areafirst. Make sure that the contact area is facing theconnectors on the device.3. Push the card in until it locks into place.4. Close the cover.Eject the memory cardImportant: Do not remove the memory card in themiddle of an operation when the card is being accessed.Removing the card in the middle of an operation may damagethe memory card as well as the device, and data stored onthe card may be corrupted.1. Press the power key briefly, and select Remove memorycard.2. Open the cover of the memory card slot.3. Press the end of the memory card to release it from thememory card slot.4. Close the cover.Connect the headsetWarning: When you use the headset, your ability tohear outside sounds may be affected. Do not use the headsetwhere it can endanger your safety.Connect the compatible headset to the headset connector ofyour device.Attach the wrist strapThread the wrist strap as shown, and tightenit.AntennasYour device may have internal and external antennas. As withany radio transmitting device, avoid touching the antennaarea unnecessarily while the antenna is transmitting orreceiving. Contact with such an antenna affects theSet up your device© 2008 Nokia. All rights reserved.18