Nokia E72 User Manual
Also see for E72: User guideDatasheetUser guideUser guideUser guide
                                                                                                                                             | |
Contents
| 
setting is only available if you have defined internet callservice settings.• Reject call with message — Reject a call, and send atext message to the caller.• Message text — Write the standard text message thatis sent when you reject a call.• Own video in recvd. call — Allow or deny videosending during a video call from your device.• Image in video call — Display a still image if video isnot sent during a video call.• Automatic redial — Set your device to make amaximum of 10 attempts to connect the call after anunsuccessful call attempt. To stop automatic redialling,press the end key.• Show call duration — Display the length of a callduring the call.• Summary after call — Display the length of a call afterthe call.• Speed dialling — Activate speed dialling.• Anykey answer — Activate anykey answer.• Line in use — This setting (network service) is shownonly if the SIM card supports two subscriber numbers,that is, two phone lines. Select which phone line youwant to use for making calls and sending textmessages. Calls on both lines can be answeredirrespective of the selected line. If you select Line 2 andhave not subscribed to this network service, you are notable to make calls. When line 2 is selected, isdisplayed in the home screen.• Line change — Prevent line selection (networkservice), if supported by your SIM card. To change thissetting, you need the PIN2 code.• Noise cancellation — Activate earpiece active noisecancellation.• Contact search — Activate contact search in the homescreen.Network settingsSelect Menu > Ctrl. panel > Settings and Phone >Network.To select the network mode, select Network mode andDual mode, UMTS, or GSM. In dual mode, the deviceswitches automatically between networks.Tip: Selecting UMTS enables faster data transfer,but may increase the demand on battery power andreduce the battery life. In regions close to both GSMand UMTS networks, selecting Dual mode maycause constant jumping between the two networks,which also increases the demand on battery power.To select the operator, select Operator selection andManual to select from available networks, or Automaticto set the device to select the network automatically.To set the device to indicate when it is used in amicrocellular network (MCN), select Cell info display >On.Connection settingsSelect Menu > Ctrl. panel > Settings and Connection.Select from the following:• Bluetooth — Edit the Bluetooth settings.• USB — Edit the data cable settings.• Destinations — Set up new or edit existing accesspoints. Some or all access points may be preset for your116 Settings |
Related manuals for Nokia E72
manualsdatabase
Your AI-powered manual search engine