with the manufacturers of vehicles using liquefiedpetroleum gas (such as propane or butane) to determineif this device can be safely used in their vicinity.Emergency callsImportant: This device operates using radio signals,wireless networks, landline networks, and user-programmed functions. If your device supports voice callsover the internet (internet calls), activate both the internetcalls and the cellular phone. The device may attempt tomake emergency calls over both the cellular networks andthrough your internet call provider if both are activated.Connections in all conditions cannot be guaranteed. Youshould never rely solely on any wireless device foressential communications like medical emergencies.To make an emergency call:1. If the device is not on, switch it on. Check for adequatesignal strength. Depending on your device, you mayalso need to complete the following:• Insert a SIM card if your device uses one.• Remove certain call restrictions you have activatedin your device.• Change your profile from Offline or Flight profile toan active profile.2. Press the end key as many times as needed to clear thedisplay and ready the device for calls.3. Enter the official emergency number for your presentlocation. Emergency numbers vary by location.4. Press the call key.When making an emergency call, give all the necessaryinformation as accurately as possible. Your wireless devicemay be the only means of communication at the scene ofan accident. Do not end the call until given permission todo so.Certification information (SAR)This mobile device meets guidelines for exposure toradio waves.Your mobile device is a radio transmitter and receiver. Itis designed not to exceed the limits for exposure to radiowaves recommended by international guidelines. Theseguidelines were developed by the independent scientificorganisation ICNIRP and include safety margins designedto assure the protection of all persons, regardless of ageand health.The exposure guidelines for mobile devices employ a unitof measurement known as the Specific Absorption Rate orSAR. The SAR limit stated in the ICNIRP guidelines is 2.0watts/kilogram (W/kg) averaged over 10 grams of tissue.Tests for SAR are conducted using standard operatingpositions with the device transmitting at its highestcertified power level in all tested frequency bands. Theactual SAR level of an operating device can be below themaximum value because the device is designed to use onlythe power required to reach the network. That amountchanges depending on a number of factors such as howclose you are to a network base station.The highest SAR value under the ICNIRP guidelines for useof the device at the ear is 1.31 W/kg.Use of device accessories may result in different SARvalues. SAR values may vary depending on national134 Product and safety information