Nokia E73 User Manual

Also see for E73: User guide User guide User guide Getting started

Contents

Nokia E73 User Manual Manual pdf 53 page image

• Wireless LAN — Set the device to display an indicator when a wireless LAN (WLAN)is available, and define how often the device searches for networks.• Video sharing — Enable video sharing, select the SIP profile for video sharing, anddefine the video saving settings.• SIP settings — View or create session initiation protocol (SIP) profiles.• XDM profile — Create an XDM profile. The XDM profile is required for manycommunications applications, for example, presence.• Presence — Edit the settings for presence (network service). To register for theservice, contact your service provider.• Remote drives — Connect the device to a remote drive.• Configurations — View and delete trusted servers from which your device mayreceive configuration settings.Access pointsCreate a new access pointSelect Menu > Ctrl. panel > Settings and Connection > Destinations.You may receive access point settings in a message from a service provider. Some or allaccess points may be preset for your device by your service provider, and you may notbe able to change, create, edit, or remove them.When you select one of the access point groups ( , , , , ), you can see theaccess point types:indicates a protected access pointindicates a packet data access pointindicates a wireless LAN (WLAN) access pointTip: You can create internet access points in a WLAN with the WLAN wizard.To create a new access point, select Access point. The device asks to check foravailable connections. After the search, connections that are already available aredisplayed and can be shared by a new access point. If you skip this step, you are askedto select a connection method and to define the settings needed.To edit the settings of an access point, select one of the access point groups, scroll toan access point, and select Edit. Use the instructions provided by your service providerto edit the following:• Connection name — Enter a name for the connection.• Data bearer — Select the data connection type.Depending on the data connection you select, only certain setting fields are available.Fill in all fields marked with Must be defined or with a red *. Other fields can be leftempty, unless your service provider has instructed otherwise.Settingswww.nokia.com/support 53CyanCyan MagentaMagenta YellowYellow BlackBlack