• Proxy port number — Enter the proxy port number.Packet data (GPRS) settingsSelect Menu > Ctrl. panel > Settings and Connection > Packet data.Your device supports packet data connections, such as GPRS in the GSM network. Whenyou are using your device in GSM and UMTS networks, it is possible to have multiple dataconnections active at the same time; access points can share a data connection, anddata connections remain active, for example, during voice calls.To define the packet data settings, select Packet data connection and Whenavailable to register the device to the packet data network when you switch the deviceon in a supported network, or When needed to register the device to a packet datanetwork only when an application or action attempts to establish a packet dataconnection. This setting affects all access points for packet data connections. To use thedevice as a packet data modem for your computer, select Access point, and enter theaccess point name provided by your service provider.WLAN settingsSelectMenu > Ctrl. panel > Settings and Connection > Wireless LAN.To have an indicator displayed when there is a wireless LAN (WLAN) available in yourcurrent location, select Show WLAN availability > Yes.To select the interval for your device to scan for available WLANs, and to update theindicator, select Scan for networks. This setting is not available unless you select ShowWLAN availability > Yes.To set the device to test the internet capability of the selected WLAN automatically, toask for permission every time, or to never perform the connectivity test, select Internetconnectivity test > Run automatically, Ask every time, or Never run. If you selectRun automatically or allow the test to be performed when the device asks for it, andthe connectivity test is performed successfully, the access point is saved to internetdestinations.WLAN security settingsSelect Menu > Ctrl. panel > Settings and Connection > Destinations > Accesspoint, and follow the instructions on the display.To edit a wireless LAN (WLAN) access point, open one of the access point groups, andselect an access point marked with .To enter the settings for the selected security mode, select WLAN security settings.Settings56 www.nokia.com/supportCyanCyan MagentaMagenta YellowYellow BlackBlack